bus powered USB transceiver for integration in serial communication environments and for encoder simulator setup

USB/RS232 parametercable
The USB transceiver is designed to connect an existing hardware device with only a serial interface RS232 with TTL levels via USB to a master periphery. The USB transceiver contains a FTDI chip that handles the USB1.1 and USB2.0 specification and comes in 3 different options:

The option as a Parametercable the unit is well suited for devices from Ing.-Buero Kirchen with a RJ10 header connection.

The option as a Single PCB the unit is optimized for the use in existing hardware devices that only own a RS232 interface. Via 4 separate header pins for RS232 (TTL) and also 4 header pins for USB, the Single PCB can be connected to the hardware board.

The option as USB Stick the unit consists of only 4 header pins for RS232 (TTL) interface (VCC,GND,TxD,RxD). 3 LEDs signals some working states.
  • USB Bus Powered
  • USB1.1 and USB2.0 specification
  • RS232 with 5V TTL
  • board-size: 37x15mm
  • Layout: TARGET3001!
You need a specific USB adaptor for your application?

Then feel free to contact us for further information.

Further converters:
USB Transceiver
USB transceiver with USB terminal