test electronics and needle bed adapter software for examine devices or single / multiple PCBs

testadaptor / Mechanic
With the help of the integrated electronics and software for a needle bed adapter it is possible to examine either single / multiple PCBs or complete devices for functionality. The actual electronics consists of two components. There are needle-adapter-electronic (EPA) boards that provide the corresponding signals transferred to the needles or picked up from the needles, on the other hand there is a main-electronic (HPA) board that communicates with the PC and retrieves all information from the individual needle-adapter-electronic boards. Additional actuators (e.g. pump, relay, valve) and sensors (e.g. color sensor, photo sensor, temperature sensor) can be controlled/evaluated via the main-electronic board. The needle signals can exist in analog or digital form.

The testing software is linked to the main-electronic board via USB. It defines all test procedures and test cycles. The test itself is then automatically proceeded - of course with the option to intervene manually or setup individual test steps. A LOG file contains all relevant information about the test process and the test results.

Of course, a test adapter is always developed customer-specifically. Our main focus here is on electronic development and the testing software.
  • Adapter-Supply Voltage: 230VAC.
  • Adapter-Interface: USB
  • Adapter-Periphery: QR-Code Scanner, Switch

  • HPA-Supply Voltage: 12VDC and 5VDC
  • HPA-Interface: USB and int. Databus for max. 20 EPAs
  • HPA-Periphery: Pressuresensor, Valve, Pump

  • EPA-Supply Voltage: 12VDC and 5VDC
  • EPA-Interface: int. Databus
  • EPA-Needlefield: 12 needles
  • EPA-Periphery: Relay, Color Sensor, Programmer
  • Layout: TARGET3001! / Firmware: MPLAB IDE / Software: Borland C++Builder
You need a specific testadaptor?

Then feel free to contact us for further information.
testadaptor / Software
testadaptor / Electronic